Lollar Electric

For homeowners

Outlets and new circuits

Lollar Electric adds, moves and removes outlets in homes around Prescott, and runs new circuits for the things an older house was never wired for. When the electrical service is too small for what you are adding, we change that too.

What the work covers

Adding an outlet

A new outlet is fed either from a nearby outlet on an existing circuit or from a new circuit of its own. Extending an existing circuit is the smaller job, and it suits light use such as a lamp or a television. It does not suit a space heater on a circuit that is already busy.

Moving or removing an outlet

An outlet can be shifted along a wall, raised for a wall-mounted television, or taken out where a cabinet is going. The wires that fed it cannot be taped off and buried in the wall. Any splice has to stay inside a box with a cover that can be reached.

Running a new circuit

A circuit is a breaker in the panel and the wire that runs from it. Large appliances get one to themselves: a range, a dryer, a water heater, a hot tub, an air conditioner, a welder in the garage. A car charger is the same idea on a larger scale.

Replacing worn or outdated outlets

Outlets wear out. One that no longer grips a plug, or that has two slots and no ground, can be replaced. An outlet that is warm, scorched or dead is a repair call.

When the panel is the limit

Every new circuit takes a breaker space in the panel and some of the capacity of the service behind it. A panel can have empty spaces and still be fed by a service that is close to its limit.

When the service itself is too small, the fix is a service change: the equipment that brings power into the house is replaced with larger equipment so the house can carry more load. Signs that a home is near its limit include breakers that trip often and a panel with no open spaces. See panel upgrades and service changes for how that job goes.

Older houses reach that limit first. The historic districts of Prescott include homes built between 1885 and the 1930s, and a house of that age may have ungrounded two-prong outlets or a service sized for a household with far fewer appliances. Prescott Valley was founded in 1966, so the housing there is newer and the wiring usually is too.

Outlet and circuit questions

Can I add an outlet to an existing circuit?

Often, yes. An outlet can be added to an existing circuit when that circuit has capacity left for what will be plugged in. A general-purpose bedroom or living room circuit usually does. A kitchen, bathroom, laundry or garage circuit often does not, and a heavy appliance should have a dedicated circuit of its own. An electrician checks what is already on the circuit before extending it.

How do I know if my electrical panel is full?

An electrical panel is physically full when every breaker space is taken. That is a separate question from whether the electrical service has capacity for more load. Whether a house can take another circuit is settled by a load calculation, which adds up what the house already uses and compares it with the size of the service. An electrician does that calculation before adding a large load.

Can two-prong outlets be replaced with three-prong outlets?

Two-prong outlets can be replaced, but a three-prong outlet should not go onto a circuit that has no ground wire unless it is protected another way. The options the electrical code accepts are running a ground wire to the outlet, or protecting it with a GFCI and labeling it as having no equipment ground. A GFCI protects people from shock. It does not supply the ground that some surge protectors rely on.

Do I need a permit to add a circuit in the Prescott area?

It depends on the work and on where the house is. Electrical permits in the Prescott area are issued by the building department for the address: the City of Prescott, the Town of Prescott Valley, the Town of Chino Valley, the Town of Dewey-Humboldt, or Yavapai County for unincorporated areas. The City of Prescott publishes a list of what needs a permit. Ask us about your address when you call.

More questions and answers

Where we do outlet and circuit work

We add outlets and circuits in homes across the Quad Cities and Yavapai County.

Short on outlets, or adding something big?

Call 928-778-2523 and tell us what you want to plug in and where. Or use the request a quote form.

Page updated

Call nowRequest a quote