For property managers and landlords
Electrician for property managers and landlords
Lollar Electric is a Prescott electrical contractor that works for property managers, landlords and owners of rental property. We repair and upgrade the electrical systems in rental houses, apartment buildings and commercial buildings around the Quad Cities, under one Arizona license, ROC 153800, that covers both residential and commercial work.

Does Lollar Electric work for property managers and landlords?
Yes. Lollar Electric does electrical work for property managers, landlords and owners of rental property in Prescott, Prescott Valley, Chino Valley and Dewey-Humboldt. We repair what has stopped working, add outlets and circuits, replace fixtures and upgrade panels, in rental houses, apartment buildings and commercial buildings.
In 2024 Fain Signature Group wrote about our work. It described us as “always coming to our aid for miscellaneous repairs and maintenance” and named some of our past projects, among them Willow Creek Apartments and Homestead Apartments. The whole list is on our About page.
What should I put in an electrical work order?
An electrical work order should say where the problem is, what the tenant noticed and when it started, what has already been tried, and who will arrange entry. With that, the electrician arrives knowing where to start and whether someone will be there, so the first visit can go to the repair instead of to questions.
Send as much of this as you have:
- The address and the unit. In an apartment or commercial building, also say where the unit's breaker panel is, if you know.
- The problem, in the tenant's words. “The outlets by the kitchen sink are dead” tells us more than “electrical issue.”
- When it started, and whether it is constant or comes and goes. Mention anything that changed around then, such as a new appliance, a storm or other work in the unit.
- What has been checked. Whether the tenant switched the breaker fully off and back on once, and pressed Reset on the GFCI outlets (the ones with Test and Reset buttons) in the kitchen, bathrooms, garage and outside. Our troubleshooting guide lists the checks that need no tools and no covers removed.
- Photos, if the tenant can take them without removing a cover: the outlet, switch or fixture, and the breaker labels inside the panel door.
- Entry. Who will set the time with the tenant, whether the tenant has had notice, and anything we should know at the door, such as pets or a gate code.
- Approval. Whether the work is approved up to a set amount, and who can approve more if the repair turns out bigger.
Some reports should not wait for a work order. If a tenant smells burning or finds an outlet that is hot, scorched or sparking, the tenant should stop using that circuit and keep clear of it, and smoke or flame is a 911 call. Our page on when to stop using an outlet lists the warning signs.
What electrical work do rentals and managed buildings need?
Most of it is the work any building needs: repairs when something stops working, outlets and circuits for tenants' equipment, new light fixtures, and now and then a panel that has run out of room. What is different in a rental is access. Someone has to arrange entry with the tenant, and some jobs go best while the unit is empty.
- Something stopped working. Dead outlets, breakers that keep tripping and lights that flicker: see troubleshooting and repair.
- Outlets and circuits. Outlets that no longer hold a plug, two-prong outlets in an older unit, or a tenant's window air conditioner or freezer that keeps tripping a shared circuit: see outlets and new circuits.
- Fixtures and fans. Worn or dated fixtures, ceiling fans, and lights in hallways, stairwells and laundry rooms: see lighting and ceiling fans.
- The panel. An older panel or fuse box, or one with no space left for another breaker: see breaker repair, panel replacement or service upgrade.
- A commercial suite. For a tenant improvement, the build-out of an office or retail space for a new tenant, see what to send for a tenant improvement quote.
Does an Arizona landlord have to fix electrical problems?
Yes. The Arizona Residential Landlord and Tenant Act requires a landlord to keep the electrical facilities and appliances it supplies, or is required to supply, “in good and safe working order and condition,” and to comply with building codes that materially affect health and safety (A.R.S. § 33-1324). The tenant's part is to tell the landlord about a needed repair promptly and in writing (A.R.S. § 33-1341).
The Act applies to rented dwelling units (A.R.S. § 33-1304), meaning homes and apartments that people live in.
How much notice does a landlord give before an electrician comes in?
At least two days, and entry has to be at a reasonable time (A.R.S. § 33-1343). Notice is not needed in an emergency or where giving it is impracticable. When the tenant has asked for the repair in writing, that request counts as permission to enter to act on it, and no separate notice is required.
Say in the work order which of these applies, so the visit is not turned away at the door.
How long can an electrical repair wait?
Not long, when it affects health and safety. If a landlord's failure to meet § 33-1324 materially affects health and safety, the tenant may give written notice ending the lease if the problem is not fixed within five days (A.R.S. § 33-1361). If a landlord deliberately or negligently fails to supply electrical service, the tenant has other remedies after reasonable notice, including moving to reasonable substitute housing and paying no rent for that period (A.R.S. § 33-1364).
This is a short summary of the statutes, not legal advice. The full Arizona Residential Landlord and Tenant Act is Chapter 10 of Title 33 of the Arizona Revised Statutes, and an attorney can tell you how it applies to a particular lease.
What should I check before adding an electrician to my vendor list?
Check the license first. Arizona licenses contractors through the Registrar of Contractors, whose contractor search shows a license's class and whether it is active. Make sure the class covers your property: Lollar Electric holds ROC 153800, class CR-11 Electrical, which covers both residential and commercial work. The license is held as Kevin Lollar Electric LLC, so search for that name or for the number. For the rest of the checklist, including insurance and a written scope, see how to choose an electrician for a business.
Can a handyman do electrical work on a rental?
Only small jobs. Arizona's handyman exemption lets someone without a contractor's license take a job only if the whole price, labor and materials included, is under $1,000, the work is casual or minor, and it needs no building permit (A.R.S. § 32-1121, subsection A, paragraph 14). A bigger job cannot be split into smaller ones to stay under the limit, and the exemption never covers hardwired or interconnected smoke alarms.
Who decides whether the job needs a permit?
The city, town or county where the property sits, not the electrician. A city or town handles parcels inside its limits, and Yavapai County handles unincorporated land. Our list of permit offices links each one.
Questions from property managers
How do I send Lollar Electric a work order?
Call Lollar Electric at 928-778-2523, Monday to Friday, 7:30 am to 4:00 pm, or put the work order in our quote request form. Give us the address and unit, the problem and when it started, what has been checked, and who will arrange entry. The full work order checklist is above.
What if the repair is bigger than the work order?
Lollar Electric tells you what failed and what the repair involves before we do it. Sometimes a dead outlet turns out to be a circuit carrying more than it should, or a problem at the panel, and the fix is a new circuit or panel work. Put in the work order who can approve more and how to reach them.
Services for rentals and managed buildings
Where we work
We take work on rental and managed property across the Quad Cities and Yavapai County.
Have a work order for us?
Call 928-778-2523 with the address, the unit and the problem. The office is open Monday to Friday, 7:30 am to 4:00 pm.
Page updated
